201
4
-
2.2 Static Table
Parameter
Description
The section describes the Static ARP Inspection Table parameters of the switch. You
could use the Static ARP Inspection Table configuration to manage the ARP entries.
Web Interface
To configure the Static ARP Inspection Table Configuration in the web interface:
1.
Click “Add New Entry”.
2.
Specify the port, VLAN ID, IP address, and MAC address in the entry.
3.
Click “Apply”.
Figure 4-2.2: The Static ARP Inspection Table
Delete:
Check to delete the entry. The entry will be deleted during the next save.
Port:
The logical port for the settings.
The VLAN ID for the settings.
MAC Address:
The allowed Source MAC address in ARP request packets.
IP Address:
The allowed Source IP address in ARP request packets.
Adding new entry:
Click to add a new entry to the Static ARP Inspection table.
Specify the port, VLAN ID, MAC address, and IP address for the new entry. Click
"Apply".
Buttons:
Apply
– Click “Apply” to save changes.
Reset
-
Click “Reset” to undo any changes made locally and revert to
previously saved values.
