200
4
-
2 ARP Inspection
4
-
2.1 Configuration
Parameter
Description
The section describes the ARP Inspection parameters of the switch. You could use
the ARP Inspection configuration to manage the ARP table.
This section describes how to configure the ARP Inspection setting including:
Mode (Enabled and Disabled)
Port (Enabled and Disabled)
Web Interface
To configure the ARP Inspection Configuration in the web interface:
1.
Select “Enabled” in the Mode of ARP Inspection Configuration.
2.
Select “Enabled” of the specific port in the Mode of Port Mode
Configuration.
3.
Click “Apply”.
Figure 4-2.1: The ARP Inspection Configuration
Mode of ARP Inspection Configuration:
Enables or disables the Global ARP
Inspection.
Port Mode Configuration:
Specifies which ports the ARP Inspection is enabled on.
Only when both Global Mode and Port Mode on a given port are enabled, then the
ARP Inspection is enabled on this given port.
Buttons:
Apply
– Click “Apply” to save changes.
Reset
-
Click “Reset” to undo any changes made locally and revert to
previously saved values.
