232
Other Info
This section contains information about the state of the server and the latest round
-
trip time.
Name
RFC4670 Name
Description
IP Address
-
IP address and UDP port for the accounting server
in question.
State
-
Shows the state of the server. It takes one of the
following values:
Disabled
: The selected server is disabled.
Not Ready
: The server is enabled, but the IP
communication is not yet up and running.
Ready
: The server is enabled, the IP
communication is up and running, and the RADIUS
module is ready to accept accounting attempts.
Dead
(X seconds left): Accounting attempts were
made to this server, but it did not reply within the
configured timeout. The server has temporarily
been disabled, but will get re
-
enabled when the
dead
-
time expires. The number of seconds left
before this occurs is displayed in parentheses. This
state is only reachable when more than one server
is enabled.
Round
-
Trip
Time
radiusAccClientExtRoundTripTime
The time interval (measured in milliseconds)
between the most recent Response and the
Request that matched it from the RADIUS
accounting server. The granularity of this
measurement is 100 ms. A value of 0 ms indicates
that there hasn't been round
-
trip communication
with the server yet.
Buttons:
Auto
-
refresh
–Check this box to enable an automatic refresh of the page at
regular intervals.
Refresh
-
Click to refresh the page immediately.
Clear
-
Clears the counters for the selected server. The "Pending Requests"
counter will not be cleared by this operation.
