versa ag leader Operator'S Manual Download Page 80

Page: 80 / 304

Firmware Version 5.4

• Marker Sets and Markers

Note:

Do not use the IBK to “clone” a display. Use AGSETUP.

.AGDATA

• Includes all the necessary data to fully archive in SMS

• Includes recorded operation data

• Equipment Used

• Products Used

• Marks Logged

• Boundaries

• Guidance Patterns

• Flexible export options

• Will be able to export by Grower

XPORT

ILES

.AGSETUP

Press: Home button > External Storage button > Export Setup

Use to transfer setup information from display to display or from SMS and display

• Replaces MSF, IBY, PAT, IRX, REF

• Allows full synchronization of the following items:

• Management Data (Growers, Farms, Fields, Seasons, Operators)

• Products and Product Mixes

• Boundaries

• Guidance Patterns

• Marker Sets and Markers

Note:

Do not use the IBK to “clone” a display anymore. Use AGSETUP.

.AGDATA

Press: Home button > External Storage button > Export Data

• Includes all the necessary data to fully archive in SMS

• Includes recorded operation data

Export
Setup

Export
Data

Summary of Contents for ag leader

















































































































































































































































































































Search results

Summary of Contents for ag leader

Reviews:

Related manuals for ag leader

Brands by name

Popular brands

versa ag leader, Operator'S Manual

Search results

Summary of Contents for ag leader

Reviews:

Related manuals for ag leader

Brands by name

Popular brands