versa ag leader Operator'S Manual Download Page 72

Page: 72 / 304

Firmware Version 5.4

5. Save, Resume, or Discard

• Save

-a. Press Save button

-b. Default name is time and date. Press

to change name.

-c. Press

to accept or

to discard boundary.

• Resume - resume creating boundary

• Discard - discards boundary and returns display to map screen

Load Headlands

Press Load Headlands button.

Select a headland from list.

• Press

to delete selected headland

• Press

to return to Headland Options screen

• Press

to load selected headland.

Edit Headlands

Press Edit Headlands button.

Select a headland from list.

• Press

to add a driven headland.

• Press

to delete selected headland.

• Press

to delete all driven headlands.

• Press

to return to Headland Options screen.

• Press

to load selected headland.

This screen will vary depending on type of headland.

Load Headlands

Name

2014-01-14_15:25:35

Edit Headlands

Clear All

Summary of Contents for ag leader

















































































































































































































































































































Search results

Summary of Contents for ag leader

Reviews:

Related manuals for ag leader

Brands by name

Popular brands

versa ag leader, Operator'S Manual

Search results

Summary of Contents for ag leader

Reviews:

Related manuals for ag leader

Brands by name

Popular brands