versa ag leader, Operator'S Manual

Page: 124 / 304

110 Firmware Version 5.4
Patterns are automatically saved when the B point is set (A point for A+ pattern). For more information
see
“AutoSave” on page 117
.
Note: On straight AB lines, if you complete a swath that is longer than the previous one, the display
automatically extends the guidance path for the following swaths.
A
DAPTIVE
C
URVE
Use the Adaptive Curve pattern to follow gentle
contours in the field, or when you need to avoid
obstacles (B) . This pattern provides guidance based
on the last curve driven.
Select Pattern
Press: Map button > Guidance tab (in Mapping Toolbox) > New Pattern button > Adaptive Curve Pattern
Selection
System defaults pattern type to last used. Press the pattern icon to select a different pattern.
- Implement Width (from Implement Setup)
- Guidance Width input box
Press . You will automatically return to the Map screen.
return to the Map screen.
Create AB line using 2 points
• Press to mark point A. A green ball appears on the map screen where point was
placed.
• Button is greyed out until you drive a minimum of 100 feet.
- Pause - Press to pause path during path creation
- Resume - Press to resume path during path creation
- Cancel - Press to cancel path during path creation
New
Pattern