VERITAS GFN 13820 User Manual Download

Page: 61 / 580

Managing Storage Units

The Storage Unit Management window appears.

2. Choose the master server with the configuration that has the storage unit.

See “Choosing the Master Server for Storage Units” on page 17.

3. Select the storage unit from those listed in the left or right pane of the

Storage Unit Management window.

In the right pane, you can select multiple storage units and delete all of
them in one operation.

4. On the Storage Unit menu, click Delete.

The Delete a Storage Unit dialog box appears so you can confirm or cancel
the deletion.

5. If any classes use the storage unit that you deleted, modify those classes to

use another storage unit.

NetBackup 3.2 System Administrator's Guide for Windows NT

Summary of Contents for GFN 13820





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GFN 13820

Reviews:

Related manuals for GFN 13820

Brands by name

Popular brands

VERITAS GFN 13820, User Manual

Search results

Summary of Contents for GFN 13820

Reviews:

Related manuals for GFN 13820

Brands by name

Popular brands