•
Turn the light switch to the headlights position to use the headlights.
Working lights operate only when the parking lights or headlights are
switched on.
•
If the tractor is equipped with upper headlights (optional), turn the light switch
to the far right position to use them.
NOTE: Your tractor has a safety circuitry for lights, meaning that if the fuse of
the light switch has burned and the lights are switched on, the front working
lights are forced on.
NOTE: The main power is not switched off automatically if the lights are left
on with the light switch. This feature is needed if the tractor has to be left on
the road, for example.
NOTE: The main power is not switched off automatically if the hazard
warning flasher is switched on.
•
To turn on the high beams, pull the multifunction lever towards yourself.
X130
1
GUID-9BAD42F5-6A0F-4B12-8234-9190C88A5F49
1. Connector X130
When the light switch is in the headlight position, the upper high beams
(optional) operate as an additional high beams when the connector X130
(black wire 185) is connected together. If the high beams of the upper
headlights glare, disconnect the X130 connector to turn them off.
When the light switch is in the upper headlight position, high beams operate
only on the upper headlights.
•
To use the headlight flasher, pull the multifunction lever towards yourself a bit
when the dipped–beams are on.
3. Operation
- 92 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
