Valtra Versu N Series Operator'S Manual Download

Page: 272 / 518

•

To start the rear PTO with the rear PTO on/off push button (optional) on the

mudguard, press the button continuously for at least 3 seconds.
The PTO starting begins after 0.5 seconds. If the pressing is interrupted

during these 3 seconds, the PTO stops.

ON/OFF

GUID-CAAA1849-6895-4A59-BBC2-84694B1B18D4

1. Rear PTO on/off push button

3.19.2.4 Stopping rear power take-off temporarily

You can stop the rear power take-off (PTO) temporarily in the following ways:
•

By using the switch for rear PTO.

•

By using the speed control knob for rear PTO.

•

By using the rear PTO on/off push button (optional) on the rear mudguard.

WARNING: When you do not need the PTO, keep the PTO switch in

the N position.

WARNING: Use the PTO speed control knob for the actual

disengagement and engagement of the PTO. For example, when

leaving the cab, turn the knob to the N position, except when using the

PTO on/off push button on the mudguard (optional).

3. Operation

- 270 -

Summary of Contents for Versu N Series







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands

Valtra Versu N Series, Operator'S Manual

Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands