2. Drain the oil by opening the two front PTO housing fastening screws at the
bottom of the housing.
3. Release the filter by loosening the lock ring and the end plate.
4. Clean the filter with diesel.
5. Dry the filter with compressed air.
6. Attach the filter and the parts in the contrary order.
Check that the O-ring fits the groove of the end plate.
7. Tighten the two front PTO housing fastening screws at the bottom of the
housing.
Tightening torque for the screws is 42 Nm.
8. Fill up the housing with oil to the level of the hole.
The breather can be loosened for bleeding. Check that the breather is not
blocked. When filling, the tractor has to stand on even ground.
9. Use the front PTO a moment and check oil.
4.7.4.21 Checking front PTO couplings
Check the front power take-off (PTO) couplings periodically.
•
Check that all fixing screws are tight.
•
Check the rubber coupling for tears.
1
1
GUID-E7E9A2B6-8596-4838-8550-CA4F323760D6
1. Rubber coupling
•
Change the rubber coupling when needed.
It is recommended to let an authorised Valtra workshop change the coupling.
4. Maintenance
- 400 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
