13. Calibration starts when the driving speed is suitable for calibrating.
Forward arrows indicate that the calibration is in process.
20
905
2
SET
1
2
3
Running...543
GUID-E069424D-4E16-4D82-8C4B-4ACC221A4BAD
In order for the calibration to proceed normally, the speed should stabilise
within 7 seconds.
14. Let the tractor drive forward until the display shows the calibration result.
•
If the calibration is completed successfully, the following view is
displayed:
20
905
2
SET
1
2
3
Calibration OK
GUID-172870FC-E314-4996-9FE8-2768A44C81FE
•
If the calibration cannot be completed successfully, the following view is
displayed:
20
905
2
SET
1
2
3
Calibration failed
GUID-D11A6245-2BC0-4CCE-BCD2-DD50599CDF95
When the calibration is completed, the engine speed lowers to low idling
speed.
15. Stop the tractor.
If the calibration was unsuccessful, perform the calibration again. If the calibration
is still unsuccessful, contact an authorised Valtra workshop.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
If calibration cannot be completed successfully, the problem may be caused by
one of the following:
4. Maintenance
- 428 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
