•
If the implement follows the ground, use the floating position.
•
Activate the floating position from the tractor terminal.
•
Set the valve to the floating position by briefly (less than one second)
pushing the joystick into the extreme forward position.
Pushing the joystick continuously forward activates the floating position
until you release the joystick.
•
To deactivate the floating position, push the joystick slightly forward or
backward.
IMPORTANT: Always use the floating position for implements following the
ground contour. Otherwise there is a risk that the implement may get
damaged or the traction of the wheels may be lost.
3.17.2
Valtra LHLink
Valtra LHLink allows the front linkage to turn when the front wheels turn. You can
adjust the turning of the front linkage as well as the offset pivoting. The turning of
the front linkage can be controlled either manually or automatically. Valtra LHLink
is useful, for example, when mowing or sweeping around the corners.
3.17.2.1 Activating and deactivating the Valtra LHLink
•
Activate the Valtra LHLink by pressing the on/off button.
1
GUID-51DB6B4D-A64A-420F-9A82-1371FAA57C12
1. LHLink on/off button
The Valtra LHLink is activated when the indicator light on the button is lit.
•
If the indicator light blinks, slowly turn the steering wheel to match the
turning angle of the front wheels to the front linkage.
The indicator light is lit.
•
Turn off the Valtra LHLink by pressing the on/off button.
The indicator light on the button blinks and goes out.
3. Operation
- 254 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
