•
Disconnect quick couplings from the rear valve to which the front linkage
shut-off valve is connected.
WARNING: When the front linkage is being connected to the rear
valve, make sure there is no load on the front linkage or rear
implement connected to the same valve. The load on the front
linkage or rear valve implement discharges when the shut-off
valve lever is turned. This may cause the implements to move
abruptly.
•
Pull the front linkage shut-off valve to the horizontal position.
•
To raise the front linkage, pull the joystick or control lever rearwards.
•
To lower the front linkage, push the joystick or control lever forwards.
•
If the implement follows the ground, use the floating position.
•
Activate the floating position from the tractor terminal.
•
Set the valve to the floating position by briefly (less than one second)
pushing the joystick or control lever into the extreme forward position.
Pushing the joystick/control lever continuously forwards activates the
floating position until you release the joystick/control lever.
•
To deactivate the floating position, push the joystick/control lever slightly
forward or backward.
IMPORTANT: Always use the floating position for implements following the
ground contour. Otherwise there is a risk that the implement may get
damaged or the traction of the wheels may be lost.
3.16.3
Setting front linkage lifting link positions
You can set the lifting links to different positions mechanically by changing the
positions of the fastening bolts.
CAUTION: When driving on public roads, with or without an
implement, always lift the front linkage fully up.
IMPORTANT: When using the front loader, the front linkage lifting links must be
folded to the transport position.
3. Operation
- 251 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......