Valtra Versu N Series Operator'S Manual Download

Page: 106 / 518

AUTO

GUID-5C4C2E1B-1CF1-4CEB-ABE3-52E8783259F0

1. Automatic air conditioning fan speed

2. Additional heater fan speed decrease

3. Display showing the additional heater's fan status and speed

4. Additional heater fan speed increase

•

Using the additional heater when the air conditioning is in the AUTO mode
The air conditioning system is in the AUTO mode when either of the

indicators AUTO or AUTO-ECO are displayed.

•

Press the additional heater fan speed decrease and increase buttons to
•

toggle between additional heater AUTO and OFF modes

•

decrease and increase the additional heater fan speed manually.

•

Using the additional heater when the air conditioning is in the ECO mode
The air conditioning system is in the ECO mode when indicator ECO

displayed. In this mode, the AC compressor is off and the air conditioning fan

speed is regulated manually.

•

Press the additional heater fan speed decrease and increase buttons to

toggle between speed 1, speed 2 and OFF.

3.6.4.5

Using defrost

Use defrost to clear frost or fog from windows.

GUID-68F48EE4-389E-4F1C-91EA-3FEAF62243BA

1. Defrost

•

To activate defrost, press the defrost button.
The LED next to the button is lit. When defrost is active, the fan speed is at

its maximum and the text HI is displayed.

•

To deactivate defrost, press the defrost button again.
The defrosting button indicator LED goes off, and the former air conditioning

mode is restored.

3. Operation

- 104 -

Summary of Contents for Versu N Series







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands

Valtra Versu N Series, Operator'S Manual

Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands