Valtra Versu N Series, Operator'S Manual

Page: 298 / 518

3. Press the down arrow button.
The distance edit view appears.
ABC
1 2 IMPL1 IMPL1
,
0 4 5 m
GUID-B6BCE43C-72C7-4C7F-B59F-280210765AD1
4. Edit the distance.
You can also change the distance unit from meters to seconds.
• Move the selection over the character you are going to change by
pressing left and right arrow buttons or by rotating the selector for the
predefined factory/user settings.
• Select the character by pressing up and down arrow buttons, the OK
button or the selector for the predefined factory/user settings.
• Change the character by pressing up and down arrow buttons or by
rotating the selector for the predefined factory/user settings.
• Accept the change by pressing left and right arrow buttons, the OK
button or the selector for the predefined factory/user settings.
• Move the selection to next character to be changed by pressing left and
right arrow buttons or by rotating the selector for the predefined factory/
user settings.
5. Move the selection over the saving symbol by pressing left and right
arrow buttons or by rotating the selector for the predefined factory/user
settings.
6. Save the changes by pressing the OK button or the selector for the
predefined factory/user settings.
NOTE: You can discard the made changes and return the previous view by
pressing ESC.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
3.20.9 U-Pilot error codes
U-Pilot error codes are shown on the tractor terminal display.
IMPL1
ABC
1 2
!
ERROR1
20 km/h
GUID-1C59B2DF-8F0F-4E7E-94A9-2EFB7604741C
3. Operation
- 296 -