•
Check the oil level.
Be sure that the engine and oil have cooled down before checking the oil
level. The oil must have run down to the bottom of the oil sump before the
operation.
•
Open the radiator cap with care when the engine is hot as the cooling system
is pressurized.
WARNING: Coolant may be hot and under high pressure.
•
Always disconnect the negative (-) battery cable when servicing or repairing
the electric system.
IMPORTANT: Make sure that the main power is turned off before
disconnecting or reconnecting the battery.
•
When changing the oil and filters, check their appearance.
Large amounts of dirt (for example heavily clogged filters) can point to a fault
which could cause extensive and costly repairs if not corrected in time.
WARNING: When changing the oil, notice that the oil can be very
hot when it drains from the tractor.
WARNING: Avoid touching the exhaust manifold, turbocharger
and other hot parts of the engine.
•
Use proper gloves and other protection for the noxious chemicals.
Fuel, lubricating oil and coolant cause irritation to the skin if they are in
contact with it for long periods.
•
Dispose of the waste oil, liquid waste, oil filters and batteries properly and
handle them carefully.
NOTE: After completion of service work, reinstall all shields and covers.
4.3.1
Cleaning the tractor
Clean the tractor regularly.
Turn the ignition key to the
(OFF) position before washing.
NOTE:
Protect the environment by following the environmental regulations. The washing
place must have a separator outlet when using detergents.
It is best to wash the new tractor for the first time a week after the start-up. Avoid
rubbing the surface of the tractor too hard during the first months.
NOTE: Do not wax the paint work of the new tractor before the initial washing.
4. Maintenance
- 329 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
