Valtra Versu N Series, Operator'S Manual

Page: 162 / 518

Operating hours
Operating hours are displayed in accuracy of one decimal place when the power
is on.
Clock
The clock is displayed on the bottom row, either in 12-hour or 24-hour mode.
You can change the time if it is not correct.
3.10.2 Single-row and two-row views
The Proline instrument panel display functions are seen in the middle of the view
in the size of two rows or on the top and middle row, depending on the function.
Different functions can be displayed at the same time on both rows.
When the power is turned on, the view that was selected last appears on the
display.
The following functions can be displayed on the display:
Symbol Function
Working time (h:mm)
Battery charge (V)
cruise cruise
RPM RPM
cruise cruise
KMH KMH
Cruise control
• RPM = engine speed
• KMH = driving speed
km/h/mph Driving speed (km/h/mph)
Wheel slip (%, 0-100)
Rear power take-off (PTO) speed (rpm)
Front power take-off (PTO) speed (rpm)
Engine speed (rpm)
Immediate fuel consumption (ha, acre)
Average fuel consumption (ha, acre)
Immediate fuel consumption
Average fuel consumption
Fuel consumption
Lower link position (%, 0-100)
Gearbox temperature (C/F)
Travel distance (m/km/miles)
Square area (ha)
Periodical maintenance
3. Operation
- 160 -