CAUTION: Do not attempt to remove any part of the air conditioning
system.
NOTE: Make sure that the compressor starts. At low temperatures, the
thermostat prevents the compressor from starting.
•
Do not attempt to repair the air conditioning system.
Contact an authorised Valtra workshop if problems occur.
•
Clean the condenser at regular intervals to remove dust, insects and other
particles.
•
Check that there are no leaks in the condenser, evaporator, hoses and
couplings.
•
Check the cleanliness of the outlet pipe of the condensation pipe.
•
Avoid contact with the refrigerant.
WARNING: If refrigerant ends up in your eyes, contact a doctor
immediately. Do not weld near the air conditioning system as
poisonous gas may be released. The maximum permissible
environmental temperature for the refrigerant pipes is 80°C.
•
It is recommended to change the drying container of the air conditioning
condenser after every 2400 hours of operation. Contact an authorised Valtra
workshop for changing the drying container.
•
If the air conditioning is not functioning properly, contact an authorised Valtra
workshop for checking of the system.
4.8
Checks and adjustments
4.8.1
Changing tyres
WARNING: When welding the discs, the tyre must be removed from
the rim/disc. There is a danger of explosion.
When selecting tyres, always contact your dealer to ensure the correct
transmission ratio for four-wheel drive (4WD).
1. Change the tyres.
IMPORTANT: Change tyres and wheels at a professional tyre workshop.
2. Check the tyre pressures.
3. When larger front tyres are fitted, check and adjust the turning angles on both
sides with maximum inclination of the front axle.
4. Set the tyre parameter.
5. Calibrate the speed sensors.
6. Tighten the wheel nuts after a few hours of driving.
4. Maintenance
- 424 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
