Valtra Versu N Series Operator'S Manual Download

Page: 464 / 518

4. Push the lowest step in the top position and fasten the two screws.

GUID-1C309D36-59FD-4D7B-81FA-3365F2CD4645

1. Screw

4.8.9.4

Checking and adjusting front mudguards

Check and adjust the front mudguards if needed.
•

After transportation, check and adjust the front mudguards for maximum

turning angle.

•

If necessary, move them to the right width so that the mudguards do not

touch the tractor chassis.
IMPORTANT: According to the EU directives the smallest allowed distance

between the side of the tyre and the mudguard is 40 mm and between the

top of the tyre to the mudguard is 60 mm.

4. Maintenance

- 462 -

Summary of Contents for Versu N Series







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands

Valtra Versu N Series, Operator'S Manual

Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands