Valtra Versu N Series Operator'S Manual Download

Page: 223 / 518

The tractors are supplied with category 3 ball hitch lower links.

WARNING: Ensure that the ball hitch lower link hooks latch correctly.

The top link has two different attaching holes on the tractor. Thus, it is possible to

get different lifting geometry for different implements. When the top link is in the

lower hole, the implement inclines forward. The upper hole gives almost

horizontal lifting movement.

3.14.1

Attaching implements

DANGER: Always use the lifting/lowering push buttons or the lifting/

lowering switch when attaching or releasing implements.

WARNING: When attaching or releasing an implement, support the

implement to prevent it from falling.

IMPORTANT: When using the hydraulic top link, ensure that it operates normally

when you are attaching an implement.

3. Operation

- 221 -

Summary of Contents for Versu N Series







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands

Valtra Versu N Series, Operator'S Manual

Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands