background image

Preface 

Dear user:  

Thank you for your selection of our 

Nitro Motors 110cc Tractor

 

Our 

Nitro Motors 110cc Tractor 

car designed with the latest technology is suitable for recreation and competition. It is equipped with single-cylinder 4-stroke 

air-cooled engine and convenient electric start. It is fixed with front and rear shock absorber to improve comfort during driving. Its front wheel is fixed with drum 
type brake and its rear wheel with top quality hydraulic disk type brake to render safe and reliable braking. 

The 

Nitro Motors 110cc Tractor 

is deluxe, artistic, dynamic, and attractive. 

Most of the frame is of steel tube structure. During driving, please take care of safety. 

We warmly welcome your opinions and suggestion on design and workmanship. 

This instruction outlines the basic structure, safe driving, operation, maintenance and main technical parameters of 

Nitro Motors 110cc Tractor 

and should be 

carefully read. In order to make the car durable and prolong its service life, please carefully follow the instruction. 

The 

Nitro Motors 110cc Tractor 

 will be subjected to continuous improvement without notice. 

Note 

·

For the 

Nitro Motors 110cc Tractor 

 merely one driver and load up to 100kg are allowed and over-load would 

make the car out of control.

·

Any one below 16-age is not allowed to drive the car.

·

During driving, please wear safety cap and clothes and other protective goods.

·

Any one after drinking or taking drug shall not drive the car.

·

The 

Nitro Motors 110cc Tractor 

 may be fixed with 50cc 

90cc and 110cc engine. Please carefully read the 

instruction.

Important 

·

Not drive the car in highway.

·

Failure to follow the instruction would result in accident or damage of car or its components.

·

Not drive the car before understanding its performance or let anyone drive the car who is unable to drive it.

·

The instruction is an integral part of the car and shall be accompanied with the car when it is transferred to other person.

·

Copyright reserved. Any part of the instruction shall not be duplicated without our written consent.

Summary of Contents for 110cc


































Reviews: