Valtra Versu N Series, Operator'S Manual

Page: 187 / 518

Cruise
2
13.0
1310
1
2
13 °C
C3
A5
1
Cruise
P
AUTO 1
B4
3
4
5
6
GUID-2BD00814-27C6-4AB6-8486-773980A8132A
C3
0
A5
RPM
240
Cruise
1 2.9
2 6.2
Cruise
0
1
AUTO 1
B4
P
2
GUID-0AA7CA1E-5380-435E-8075-291B00A65104
1 The tractor symbol is lit when the power is on.
The STOP symbol light starts flashing (the engine must be running) at the same time
with the STOP light on the instrument panel when there is a serious fault.
IMPORTANT:
If the STOP light starts flashing, stop the tractor and engine immediately. You can
continue driving only in an emergency, for example to move the tractor to the roadside.
When the system detects an error in its own operation, the book symbol flashes on the
tractor symbol. If the STOP light on the instrument panel does not flash, you can
continue driving.
IMPORTANT:
If the engine does not run over 1500 rpm, there is a serious fault, for example air in the
fuel. To avoid damages, driving is only allowed to move the tractor to a safe place.
The driver's seat symbol flashes on the display if the driving direction is selected with the
power shuttle lever and the operator is not seated.
Auxiliary hydraulic control's safety timeout symbol flashes on the display approximately
30 seconds before the hydraulic controls are disabled by the auxiliary hydraulic control's
safety timeout function.
2 The hydraulic cylinder symbol flashes when there is pressure requested at least from
one auxiliary hydraulic valve.
The floating state symbol flashes on the display when there is at least one auxiliary
hydraulic valve in the floating state.
The symbols flash in turns if there is at least one auxiliary hydraulic valve in the floating
state and pressure is requested at least from one auxiliary hydraulic valve.
Auxiliary hydraulic control's safety time-out symbol appears on the display when the
auxiliary hydraulic controls are disabled by the auxiliary hydraulic control's safety time-
out function.
Table continued on next page
3. Operation
- 185 -