Valtra Versu N Series, Operator'S Manual

Page: 311 / 518

1
2 3
ON/OFF
GUID-288EE569-37CE-4942-B519-2E306B7CEAFD
1. Lifting/lowering switch
2. Lifting push button
3. Lowering push button
1. Reverse the tractor up to the trailer/implement.
2. Align the pick-up hitch hook or drawbar pin to the eye of the trailer/implement
beam.
3. Press the symbol side of the lifting/lowering switch or the lifting push button
until the hitch latches.
You can hear a click and the trailer hitch release lever jumps a little.
4. Press the lifting/lowering switch side opposite to the symbol or the lowering
push button to lower the linkage slightly.
WARNING: When using a trailer, make sure that the hitch latch is
locked.
Ensure that the hitch is supported by the latch and does not lower with the
linkage.
5. Check the linkage position.
IMPORTANT: Adjust the linkage so that it does not hit the towed device or
power take-off shaft at any circumstance.
3.24.4.3 Extending the Hydraulic pick-up hitch
When the frame of the towing device is lowered, you can extend it hydraulically
backwards to make it easier to attach the trailer hitch/drawbar/Ø80mm ball hitch
to the drawbar eye. The cylinder of the hydraulic extension is connected
permanently to the rear on/off valve 2.
3. Operation
- 309 -