background image

Summary of Contents for KCC-151

Page 1: ...MSTANCES REMOVE THE POWER SUPPLY CORD GROUND PRONG For your personal safety this appliance must be grounded This appliance IS equrpped with a power supply cord havtng a 3 prong grounding plug To mlnimlze possble shock hazard the cord must be plugged Into a matlng 3 prong grounding type wall receptacle grounded In accordance with the Natlonal ElectrIcal Code and local codes and ordinances If a matt...

Page 2: ...Some models have a literature storage compartment located inside the front panel See Figure 9 DO NOT REMOVE THE BAG 6 Lay two carton corner posts or other protective material such as a throw rug on the floor then lay the umt on either of Its sides on the corner posts The corner posts will protect the finish of the compactor and the floor See Figure 8 NOTE Do not truck or handle by console FIGURE8 ...

Page 3: ...re 14 RETAINER BRACKET RETAINER BRACKET MOUNTING SCREW COUNTER TOPMOUNTING Al TEERNATE CABINET FRONT FIGURE 14 MOUNTIMING Lift the front of the compactor until it is parallel with the cabinet front Place a screwdriver or other wedge under the front edge of the compactor 14 Loosen the screws to the front levelers do not remove screws Pivot the levelers to the floor and retighten screws See Figure 1...

Page 4: ...place the remaining panels and spacers on the inside 8 Replace the handle with the screws removed In Step 2 above 9 Replace the drawer kiiiiik REPLACEHANDLEBEFOREOPERATlNG COMPACTOR TOAVOIDINJURYFROMMOVINGPARTS CUSTOM DECORATING In place of the panel pack you may use a l 4 thick wood panel to match your cabinets or other suitable decorative material See Figure 18 To do so 1 Follow Steps 1 through ...

Reviews: