Utax P-4531DN, Operation Manual

Page: 141 / 352

4-63
Operation Panel
Disconnect Timer (Setting the Disconnect Time)
You can set the time after which devices connected by Wi-Fi Direct are automatically disconnected.
1
In the
Wi-Fi Direct Set
menu, press  or  to select
Disconnect Timer
.
2
Press [OK] . The
Disconnect Timer
screen appears.
3
Press  or  to set the day, hour, and minute.
Use

and

to move the cursor right and left.
4
Press [OK] . The disconnect time is set and the
Wi-Fi Direct Set
menu reappears.
Wi-Fi Settings (Wi-Fi Settings)
Set Wi-Fi.
The options available in the Wi-Fi settings are as follows:
• Wi-Fi (Enable/Disable Wi-Fi)...4-63
• Setup (Wireless network settings)...4-64
• TCP/IP Settings (TCP/IP Settings for the optional Network Interface Kit)...4-89
• Restart Network (Restarting the optional Network Interface Kit)...4-70
1
In the
Network
menu, press  or  to select
Wi-Fi Settings
.
2
Press [OK] . The
Wi-Fi Settings
menu screen appears.
Wi-Fi (Enable/Disable Wi-Fi)
This specified whether Wi-Fi is used.
1
In the
Wi-Fi Settings
menu, press

or

to select
Wi-Fi
.
2
Press [OK] . The
Wi-Fi
screen appears.
3
Press  or  to select
On
or
Off
.
4
Press [OK] . The
Wi-Fi
setting is set and the
Wi-Fi Settings
menu reappears.
Note
This setting is displayed when the setting for Auto Disconnect (Auto Disconnect Settings) on page 4-62 is set
to
On
.
Disconnect Timer:
Day
01
Hour Min.
: : 00 00
Note
Wi-Fi Settings
is only displayed when the optional Wireless Network Interface Kit (IB-36) is installed.
Wi-Fi Settings:
Wi-Fi
Exit
Setup
01
02
TCP/IP Settings 03
Wi-Fi:
Off
01
On
02
*