Utax P-4531DN Operation Manual Download

Page: 97 / 352

4-19

Operation Panel

To edit the destination, press

[OK]

Press





to select

Edit

Press

[OK]

Enter the address using the numeric keys.

Press

[OK]

To delete the destination, press

[OK]

Press





to select

Delete

Press

[OK]

. A confirmation message is displayed.

To proceed with deleting the destination, press

[Yes]

([Left Select])

Completed.

appears and the account is deleted.

Pressing

[No]

([Right Select])

returns to the

Dest. Confirm.

menu without deleting the destination.

Subject (Setting job log subject)

Set the subject automatically entered when sending log histories by E-mail.

In the

Job Log History

menu, press





to select

Subject

Press

[OK]

. The

Subject

screen appears.

[email protected]

Edit

Delete

Address Entry:

Text

ABC

[email protected]

Note

Up to 128 characters can be entered. For details on

entering characters, refer to

Character Entry Method on page

A-2

Dest. Confirm.:

Exit

[email protected]

Edit

Delete

Delete.

Are you sure?

Yes

[email protected]

Subject:

Text

ABC

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands