Utax P-4531DN Operation Manual Download

Page: 202 / 352

Operation Panel

4-124

In the

Security

menu, press





to select

I/F Block Set.

Press

[OK]

. The

I/F Block Set.

menu screen appears.

USB Host (USB Port setting)

This blocks and protects the USB Port (USB Host).

In the

I/F Block Set.

menu, press





to select

USB Host

Press

[OK]

. The

USB Host

screen appears.

Press





to select whether to block and protect the USB host.

Press

[OK]

. The USB Host setting is set and the

I/F Block Set.

menu reappears.

USB Device (USB interface setting)

This blocks and protects the USB interface.

In the

I/F Block Set.

menu, press





to select

USB Device

Press

[OK]

. The

USB Device

screen appears.

Press





to select whether to block and protect the USB device.

Press

[OK]

. The USB Device setting is set and the

I/F Block Set.

menu reappears.

Option I/F (Optional network interface setting)

This blocks and protects the optional network interface.

In the

I/F Block Set.

menu, press





to select

Option I/F

Press

[OK]

. The

Option I/F

screen appears.

Press





to select whether to block and protect the optional

network interface.

Press

[OK]

. The Optional I/F setting is set and the

I/F Block Set.

menu reappears.

I/F Block Set.:

Option I/F

Exit

USB Device

USB Host

USB Host:

Unblock

Block

USB Device:

Unblock

Block

Option I/F:

Unblock

Block

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands