Utax P-4531DN Operation Manual Download

Page: 270 / 352

Status Menu

6-6

Wi-Fi

When the optional Wireless Network Interface Kit (IB-36) is installed, it is possible to check the status of the option wireless
network.

In the

Status

menu, press





to select

Wi-Fi

Press

[OK]

. The

Wi-Fi

menu is displayed.

Press





to select the item you want to check.

The following items can be checked.
• Status
• Host Name
• IP Address(IPv4)
• IP Address(IPv6)
• NetwkName(SSID)
• MAC Address

Press

[OK]

. The selected details appear.

Wi-Fi Direct

You can check the connection status of the optional Wireless Network Interface Kit, and set the network by push-button.

In the

Status

menu, press





to select

Wi-Fi Direct

Press

[OK]

. The

Wi-Fi Direct

menu is displayed.

The options available in the Wi-Fi Direct settings are as follows:
• PushButton Setup...6-7
• Detail Info...6-7
• ConnectionStatus...6-7

Note

Wi-Fi

is only displayed when the optional Wireless Network Interface Kit (IB-36) is installed.

Wi-Fi:

Host Name

Exit

Status

IP Address(IPv4)

Note

Wi-Fi Direct

is only displayed when the optional Wireless Network Interface Kit (IB-36) is installed.

Wi-Fi Direct:

Detail Info

PushButton Setup

ConnectionStatus

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands