Utax P-4531DN Operation Manual Download

Page: 281 / 352

7-9

Maintenance

Cleaning the Printer

To avoid print quality problems, the interior of the printer must be cleaned with every toner container replacement.

IMPORTANT

Before cleaning the printer, remove the paper on the MP tray.

Open the top cover and front cover.

Pull the developer unit together with the toner container.

Use a lint free cloth to clean dust and dirt away from the registration
roller (metal).

Insert the developer unit together with the toner container, back into
the machine.

Registration
roller (metal)

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands