Utax P-4531DN Operation Manual Download

Page: 43 / 352

2-21

Preparation before Use

Uninstalling the Software

Perform the following procedure to delete the Software from your computer.

Click

Search

in charms, and enter

Uninstall Product Library

in the

search box. Select

Uninstall Product Library

in the search list.

Place a check in the check box of the software to be deleted.

Click

Uninstall

If a system restart message appears, restart the computer by
following the screen prompts. This completes the software
uninstallation procedure.

Installing Printer Driver in Macintosh

The machine's printer functionality can be used by a Macintosh computer.

The following is an explanation for installation in MAC OSX 10.9.

Insert the

Product Library

disk.

Double-click the

GEN_LIB

icon.

Note

Uninstallation on Windows must be done by a user logged on with administrator privileges.

Note

In Windows 7, click

Start

button on the Windows and

then select

All Programs

, (name of offer company), and

Uninstall Product Library

to display the Uninstall Wizard.

Note

The software can also be uninstalled using the

Product

Library

disk.

In the Product Library installation screen, click

Uninstall

, and

follow the on-screen instructions to uninstall the software.

Note

Installation on MAC OS must be done by a user logged on with administrator privileges.

When printing from a Macintosh computer, set the machine's emulation to

KPDL

KPDL(Auto)

. For details, refer

Emulation (Setting the emulation) on page 4-48

If connecting by Bonjour, enable Bonjour in the machine's network settings. For details, refer to

ProtocolSettings

(Detailed settings for the network protocol) on page 4-78

In the Authenticate screen, enter the name and password used to log in to the operating system.

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands