Utax P-4531DN, Operation Manual

Page: 156 / 352

Operation Panel
4-78
ProtocolSettings (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
Item Description
Restarting the System
†
†

: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Bonjour
††
††
Set whether the setting is enabled on each network when the optional Wireless Network Interface Kit is installed.
Select whether to use Bonjour. 
IPSec Make this setting when you use IPSec.

NetBEUI
††
Selects whether or not to receive documents using
NetBEUI. 
SNMPv3
††
Set SNMPv3. 
FTP (Server)
††
Select whether or not to receive documents using FTP. 
SNMP
††
Select whether or not to communicate using SNMP.

SMTP Select whether or not to send e-mail using SMTP.

POP3 Select whether or not to receive e-mail using POP3. 
RAW Port
††
Select whether or not to communicate using RAW Port. 
LPD
††
Select whether or not to receive documents using LPD as
the network protocol. 
IPP
††
Selects whether to receive documents using IPP. To use the
IPP protocol, select
Not Secure (IPP&IPPS)
on IPP
Security under Security Settings from the Embedded Web
Server RX. The default port number is 631.

IPP Over SSL
††
Select whether or not to use IPP over SSL. 
HTTP
††
Select whether or not to communicate using HTTP. 
HTTPS
††
Select whether to communicate using HTTPS. 
LDAP Select whether or not to use LDAP. 
ThinPrint
††
Select whether to use ThinPrint. To use the Thin Print
protocol, set the protocol to
On
. The default port number is
4000.
Also, to use the Thin Print over SSL protocol, set
Thin
Print Over SSL
to
On
.
Note
This function is displayed only when the optional
ThinPrint Option (UG-33) is activated.

WSD-PRINT
††
Set whether to use our proprietary web services. 
EnhancedWSD
††
Set whether to use our proprietary web services. 
Enhanced WSD(SSL)
††
Set whether to use our proprietary web services over SSL. 