Utax P-4531DN, Operation Manual

Page: 325 / 352

A-13
Appendix
Selecting the Right Paper
This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In
particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a
surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause such
paper to give off harmful fumes.
Bond paper should contain at least 80 % pulp. Not more than 20 % of the total paper content should consist of cotton or
other fibers.
Paper Sizes
Cassettes and the MP tray are available for the paper sizes listed in the table below. For details, including the paper sizes
for the paper feeder (Optional paper feeder PF-320) refer to Setting the standard paper size on page 4-32 .
The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width. The angle at the corners must be 90°
±0.2°.
Yes: Can be stored No: Cannot be stored
Paper Size Size
Cassette
(P-4531DN)
Cassette
(P-5031DN/
P-5531DN/P-
6031DN)
Cassette
(PF-320)
Bulk Paper
Feeder
(PF-3100)
MP Tray
Envelope Monarch 3.88 × 7.5 inches No No Yes Yes Yes
Envelope #10 4.13 × 9.5 inches No No Yes Yes Yes
Envelope DL 110 × 220 mm Yes Yes Yes Yes Yes
Envelope C5 162 × 229 mm Yes Yes Yes Yes Yes
Executive 7.25 × 10.5 inches Yes Yes Yes Yes Yes
Letter 8.5 × 11 inches Yes Yes Yes Yes Yes
Legal 8.5 × 14 inches Yes Yes Yes No Yes
A4 210 × 297 mm Yes Yes Yes Yes Yes
B5(JIS) 182 × 257 mm Yes Yes Yes Yes Yes
A5-R 148 × 210 mm Yes Yes Yes Yes Yes
A5 210 × 148 mm Yes Yes No No Yes
A6 105 × 148 mm No Yes No Yes
†
Yes
B6 128 × 182 mm No Yes Yes Yes Yes
Envelope #9 3.88 × 8.88 inches No No Yes Yes Yes
Envelope #6-3/4 3.63 × 6.5 inches No No Yes Yes
†
Yes
ISO B5 176 × 250 mm Yes Yes Yes Yes Yes
Hagaki 100 × 148 mm No No No Yes
†
Yes