Utax P-4531DN, Operation Manual

Page: 77 / 352

3-9
Printing
ThinPrint Activation (Optional Feature)
This printer can select whether or not to communicate using ThinPrint.
For more details on operation, refer to Op Functions (Optional application settings) on page 4-154 .
Secure Pull Printing (Optional Feature)
Secure Pull Printing is a printing feature where a user pulls the print job to a printer selected after the job is spooled in a
server. To use this feature, the following system environments are required.
The Authentication server: aQrate (Optional Software) must be installed.
ID card and ID card reader: they are used to register and authenticate a user.
The Spooler server: it sends the print job to a selected printer after the user logs in.
For more details, contact your dealer or service representative.
Printing by Google Cloud Print
Google Cloud Print is a printing service provided by Google and does not require a printer driver. This service enables a
user with a Google account to print from a machine connected to the Internet.
The machine can be configured in the Embedded Web Server RX. Refer to the Embedded Web Server RX User Guide .
Printing with Wi-Fi Direct
Wi-Fi Direct is a wireless LAN standard that Wi-Fi Alliance has been established. This is one of the functions of the wireless
LAN, without a wireless LAN access point or wireless LAN router, between devices can communicate directly on a peer to
peer basis.
The printing procedure by the Wi-Fi Direct is the same as that from the normal handheld devices.
When you use a printer name or Bonjour name on the port settings of the printer property, you can print the job by specifying
the name at Wi-Fi Direct connection.
When you use an IP address for the port, specify the IP address of this machine.
Note A Google account is necessary to use Google Cloud Print. Obtain a Google account if you do not have one.
It is also necessary to register the machine with the Google Cloud Print service in advance. The machine can be
registered from a PC connected to the same network.
6 . The user pulls
the print job from
the selected printer.
5 . The spooler
server sends the
print job to the
selected printer.
2 . The spooler server
receives the print job.
1 . A user sends
the print job to the
spooler server.
4 . The Authentication
Server confirms the
login information
registered.
3 . The user logins to the
printer or other MFP via
an Authentication Server
using an ID card.