Utax P-4531DN Operation Manual Download

Page: 167 / 352

4-89

Operation Panel

Press

[Edit]

(

[Right Select]

). The

Preshared Key

entry screen

appears.

Enter the Preshared Key using the numeric keys.

Press

[OK]

. The

Encryption

menu reappears.

Basic (Basic settings for the optional Network Interface Kit)

This selects the basic settings for the optional Network Interface Kit (IB-50) or optional Wireless Network Interface Kit (IB-
51) network.

In the

Optional Network

menu, press





to select

Basic

Press

[OK]

. The

Basic

menu screen appears.

The following operations are possible:
• TCP/IP Settings (TCP/IP Settings for the optional Network

Interface Kit)...4-89

• Netware (NetWare setting)...4-90
• AppleTalk (AppleTalk setting)...4-90
• IPSec (IPSec setting)...4-91
• LAN Interface (LAN Interface setting)...4-91
• MACAddressFilter (MAC address filtering setting)...4-91
• Restart Network (Restarting the optional Network Interface Kit)...4-

TCP/IP Settings (TCP/IP Settings for the optional Network Interface Kit)

This selects the TCP/IP settings.

The options available in the TCP/IP Settings are as follows:

• TCP/IP (Enable/Disable TCP/IP)
• IPv4 Setting (TCP/IP IPv4 settings)
• IPv6 Setting (TCP/IP IPv6 settings)

In the

Basic

menu, press





to select

TCP/IP Settings

Press

[OK]

. The

TCP/IP Settings

menu screen appears.

TCP/IP (Enable/Disable TCP/IP)

This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to

TCP/IP (Enable/Disable TCP/

IP) on page 4-71

Preshared Key:

Text

ABC

Note

The number of characters is between 8 and 64. For

details on entering characters, refer to

Character Entry

Method on page A-2

Basic:

AppleTalk

Exit

NetWare

TCP/IP

TCP/IP Settings:

IPv6 Setting

Exit

IPv4 Setting

TCP/IP

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands