Utax CD 1028 Instruction Handbook Manual Download Page 87

Page: 87 / 435

Basic Operation

3-8

OPERATION GUIDE

Message Display

The following examples explain the messages and icons used on the message display.

Reference

number

Meaning

Indicates the current status of the machine. Also displays the title of the current
menu whenever the operation panel is being used.

Displays an icon that indicates the currently selected source of paper feed. The
meaning of each icon is as indicated below.

The standard paper cassette is currently selected. When this icon is
displayed as

, there is no paper is the cassette.

B
C

The paper cassette for the optional paper feeder is currently selected.
When this icon is displayed as

, there is no paper is the cassette.

The MP Tray is currently selected. When this icon is displayed as

, there

is no paper is the MP Tray.

Displays the size of the original(s).

Displays the current setting when there is a corresponding menu that can be
selected using the left or right Select keys.

Displays the title of the corresponding menu that can be selected using the left
or right Select keys.

Displays the number of copies.

Displays the paper size to be copied.

Displays the number of destinations.

Displays the destination.

Ready to send.

Dest.: 1

:sally@

1-sided
[ Duplex ] [ ]

Ready to copy.

Copies:

100%

[ Zoom ] [ ]

3
4
5

6
7

Copier Screen

Send Screen

8
9
4
5

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 87 / 435

Search results

Summary of Contents for CD 1028

Reviews: