Utax CD 1028 Instruction Handbook Manual Download Page 2 | Manualshive

Page: 2 / 435

Utax CD 1028 Instruction Handbook Manual Download Page 2

Introduction

Thank you for your purchase of

CD 1028/1128

.

This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and
take a simple troubleshooting action as necessary, so that you can always use the machine in good condition.

Please read this Operation Guide before you start using the machine, and keep it close to the machine for easy
reference.

We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of
third party supplies in this machine.

Included Guides

The following guides are supplied with the machine. Refer to them as necessary.

Operation Guide (This Guide)

Describes how to load paper, basic copy, print and scan operations, and troubleshooting.

«
1
2
3
4
...
»

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments