Utax CD 1028 Instruction Handbook Manual Download Page 14 | Manualshive

Page: 14 / 435

Utax CD 1028 Instruction Handbook Manual Download Page 14

xii

OPERATION GUIDE

Laser Safety (Europe)

Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this
machine is hermetically sealed within the protective housing and external cover. In the normal operation of the
product by user, no radiation can leak from the machine.

This machine is classified as Class 1 laser product under IEC 60825.

Caution:

Performance of procedures other than those specified in this manual may result in hazardous radiation

exposure.

These labels are attached to the laser scanner unit inside the machine and are not in a user access area.

The label shown below is attached on the rear side of the machine.

«
...
12
13
14
15
16
...
»

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments