Utax CD 1028 Instruction Handbook Manual Download Page 55

Page: 55 / 435

Preparation before Use

2-22

OPERATION GUIDE

Press the

key. The IPv4 Setting menu appears.

Press the

key to select [Bonjour].

Press the

key. Bonjour appears.

Press the

key to select [On] or [Off] and

then press the

key.

Completed.

is displayed and the screen returns to

the IPv4 Setting menu.

AppleTalk Setup

Select the Apple Talk network connection. The default setting is

Use the procedure below to setup the AppleTalk setting.

Press the

System Menu/Counter

key on the main

unit operation panel.

When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.

NOTE:

• Refer to

Character Entry Method on Appendix-5

for

details on entering characters.

• If [Netwk Authentic.] is selected as the user

authentication method, press [Menu] (the

Left

Select

key) to select the authentication destination.

IPv4 Setting:

DHCP

*********************

IP Address

[ Exit

]

Bonjour:

*********************

********************

[ Menu

] [ Login

]

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 55 / 435

Search results

Summary of Contents for CD 1028

Reviews: