manualshive.com logo in svg

Utax CD 1028, Instruction Handbook Manual, Page: 344 / 435

Share
Download
Utax CD 1028 Instruction Handbook Manual Download Page 344

Maintenance 

OPERATION GUIDE

9-7

9

Prolonged Non-Use and Moving of the Machine

Prolonged Non-use

If you ever leave the machine unused for a long period of time, remove the power cord from the wall outlet.

We recommend you consult with your dealer about the additional actions you should take to avoid possible 
damage that may occur when the machine is used next time.

Moving the Machine

When you move the machine:

• Move it gently.
• Keep it as level as possible to avoid spilling toner inside the machine.
• Be sure to consult a service technician before attempting long distance transportation of the machine.

WARNING: 

If you ship the machine, remove and pack the developer unit and drum unit in a plastic bag and 

ship them separately from the machine.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments