Utax CD 1028 Instruction Handbook Manual Download Page 174

Page: 174 / 435

Status / Job Cancel

OPERATION GUIDE

7-11

When complete job name not displayed in detailed information

Press [Detail] (the

Right Select

key) in Job Name to see the complete job name. Press the

key to return to

the original screen.

When complete destination name not displayed in detailed information

When there is only one destination, press [Detail] (the

Right Select

key) in Destination to see the complete

destination name. Press the

key to return to the original screen.

When there are two or more destinations, press [List] (the

Right Select

key) in Destination to display the

destination list. Press the

key to select the desired destination and press the

key. This displays the

complete name of the destination. Press the

key to return to the destination list.

Pressing [Exit] (the

Right Select

key) while the destination list is displayed brings you back to the original

screen.

Displaying Store Job Log

Press the

Status

Job Cancel

key. The Status

menu appears.

Press the

key to select [Store Job Log].

Press the

key. Store Job Log appears. Press

the

key to check the store queue.

A job result icon is displayed on the extreme right
of each job.

: Job completed normally

: Job error

: Job aborted

NOTE:

For details of other items, refer to

Store Job

Status screen on page 7-6

Status:

*********************

Send Job Status

Store Job Status

[ Pause ]

Store Job Log:

0008

Scan

0009

maury’s data

0010

aaaa

[ Detail ]

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 174 / 435

Search results

Summary of Contents for CD 1028

Reviews: