Utax CD 1028 Instruction Handbook Manual Download Page 85

Page: 85 / 435

Basic Operation

3-6

OPERATION GUIDE

Login/Logout

If user login administration is enabled, it is necessary to enter the login user name and password to use the
machine.

NOTE:

You will be unable to log in if you forget your login user name or login password. In this event, log in

with administrator privileges and change your login user name or login password.

Login

NOTE:

Refer to

Character Entry Method on Appendix-5

for details on entering characters.

If the screen shown appears during operations,
enter the login user name.

Press the

key. The input cursor moves to Login

Password.

Enter the login password.

Press the

key to move the input cursor to Login

User Name.

Check the login user name and password are
correct, and press [Login] (the

Right Select

key).

NOTE:

If [Netwk Authentic.] is selected as the user

authentication method, press [Menu] (the

Left Select

key) to select the authentication destination.

Logout

To logout from the machine, press the

Logout

to return

to the login user name/password entry screen.

*******************

[ Menu

] [ Login

]

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 85 / 435

Search results

Summary of Contents for CD 1028

Reviews: