manualshive.com logo in svg

Utax CD 1028, Instruction Handbook Manual, Page: 13 / 435

Share
Download
Utax CD 1028 Instruction Handbook Manual Download Page 13

 

OPERATION GUIDE

xi

Other precautions

Return the exhausted toner container and waste toner box to your dealer or service representative. The 
collected toner container and waste toner box will be recycled or disposed in accordance with the relevant 
regulations.

Store the machine while avoiding exposure to direct sunlight.

Store the machine in a place where the temperature stays below 40ºC while avoiding sharp changes of 
temperature and humidity.

If the machine will not be used for an extended period of time, remove the paper from the cassette and the Multi 
Purpose (MP) Tray, return it to its original package and reseal it.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments