manualshive.com logo in svg

Utax CD 1028, Instruction Handbook Manual, Page: 340 / 435

Share
Download
Utax CD 1028 Instruction Handbook Manual Download Page 340

Maintenance 

OPERATION GUIDE

9-3

9

2

Lift the developer unit together with the toner 
container out of the machine.

3

Remove the drum unit from the machine by holding 
the green levers with both hands.

NOTE: 

The drum unit is sensitive to light. Never 

expose the drum unit to light for more than five 
minutes.

4

Place the drum unit flat on a clean, level surface.

IMPORTANT: 

Do not place the drum unit on end.

5

Use a clean, lint free cloth to clean dust and dirt 
away from the metal registration roller.

IMPORTANT: 

Take care not to touch the transfer roller 

(black) during cleaning.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments