manualshive.com logo in svg

Utax CD 1028, Instruction Handbook Manual, Page: 298 / 435

Share
Download
Utax CD 1028 Instruction Handbook Manual Download Page 298

Default Setting (System Menu) 

OPERATION GUIDE

8-113

8

6

Press the 

U

 or 

V

 key to select [Add Address].

7

Press the 

OK

 key. Add Address appears.

8

Press the 

U

 or 

V

 key to select [Contact].

9

Press the 

OK

 key. This displays the screen for 

editing destinations.

NOTE: 

If the maximum number of destinations has 

already been registered, the screen will display 

Registered numbers exceeded.

 and return to the 

Address Book.

10

Enter each item and then press the 

OK

 key. 

Registered.

 is displayed and the screen returns to 

the Address Book list screen.

Refer to the descriptions below for how to enter 
each item.

Entering Contact Name

1

Press the 

Y

 or 

Z

 key to select [Contact Name].

2

Press [Edit] (the 

Right Select

 key). An entry 

screen appears.

3

Enter the contact name.

If creating a new contact name, the address 
number allocated to the destination is already 
entered.

4

Press the 

OK

 key. The contact name is registered.

Add Address:

a

  

b

 

*********************

2

  Group

  

Detail:

C

  

b

 

Contact Name

1/7

Sally

[ Edit

]

Detail:

C

  

b

 

Contact Name

1/7

Sally

[ Edit

]

Contact Name:

A

  

b

 

Sally

*

S

    

 

ABC

[ Text

]

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments