Utax CD 1028 Instruction Handbook Manual Download Page 30

Page: 30 / 435

Part Names

OPERATION GUIDE

1-3

Lit when the machine's

main power is on.

Used to register or recall

programs.

Ends operation

(logs out) on the

Administration screen.

Turns the machine on/off. Also used

to put it into or recover it from sleep

mode.

Cancels the printing job in progress.

Resets settings and displays the

basic screen.

Starts copying and scanning operations and processing for

setting operations.

Clears entered numbers and characters.

Numeric keys. Enter

numbers and symbols.

Displays the function menu for copy,

print, transmission and document box.

Used to select a menu item, move the cursor when

entering characters, change a value, etc.

Returns the Message Display to the

previous screen.

Lights or blinks when an error occurs.

Selects the chosen item or finalizes the entered

value.

Blinks while the machine is accessing the memory.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 30 / 435

Search results

Summary of Contents for CD 1028

Reviews: