Utax CD 1028 Instruction Handbook Manual Download Page 106

Page: 106 / 435

Basic Operation

OPERATION GUIDE

3-27

Confirm Destination Screen

If the screen for confirming the destination before transmission (

page 8-64

) is set to [On],

Check through the all

destination and press [Next].

appears when the

Start

key is pressed.

Use the procedure below to operate the Confirm Destination screen.

Press the

key to check all destinations.

Press the

key to edit or delete the selected

destination.

To add a destination, press [Cancel] (the Left
Select key) to return to the previous screen.

After the checking is finished, press [Next] (the

Right Select

key).

Set original and press Start key.

is displayed on the screen.

If there are destinations that are hidden and not yet
checked, the screen displays

Check the destination

list through the end.

and returns to the Destination

List screen. Check all destinations.

Place the original on the platen and press the

Start

key. Transmission starts.

Destination List:

*********************

0667640000

0667741234

[ Cancel ] [ Next ]

Morgan@

Detail

Delete

Set original
and press Start key.

[ Cancel ]

Check the destination
list through the end.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 106 / 435

Search results

Summary of Contents for CD 1028

Reviews: