Utax CD 1028, Instruction Handbook Manual, Page: 51 / 435

Preparation before Use
2-18 OPERATION GUIDE
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On .
Use the procedure below to specify the DHCP setting.
1
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
NOTE:
• Refer to Character Entry Method on Appendix-5 for
details on entering characters.
• If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
2
In the Sys. Menu/Count. menu, press the
U
or
V
key to select [System], and then press the OK key.
IMPORTANT: To make the settings, you must have
logged in using a user ID with administrator privileges.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
In the System menu, press the U or V key to select
[Network Setting].
Login User Name: L b
********************
Login Password:
[ Menu ] [ Login ]
Sys. Menu/Count.: a b
1
Report
2
Counter
*********************
[ Exit ]
Administrator only.
System:
a b
*********************
2 I/F Block Set.
3
Security Level
[ Exit ]