manualshive.com logo in svg

Utax CD 1028, Instruction Handbook Manual, Page: 84 / 435

Share
Download
Utax CD 1028 Instruction Handbook Manual Download Page 84

Basic Operation 

OPERATION GUIDE

3-5

3

Sleep and Auto Sleep

Sleep

To enter Sleep, press the 

Power

 key. Message Display 

and all indicators on the operation panel will go out to 
save a maximum amount of power except the Main 
Power indicator. This status is referred to as Sleep.

If print data is received during Sleep, the print job is 
performed while the Message Display remains unlit.

If you are using the CD 1128

, received fax data is printed 

out while the operation panel also remains unlit.

To resume, press the 

Power

 key. The machine will be 

ready to operate in about 15 seconds.

Note that ambient environmental conditions, such as 
ventilation, may cause the machine to respond more 
slowly.

Auto Sleep

Auto Sleep automatically switches the machine into Sleep Mode if left idle for 15 minutes.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments