Utax CD 1028, Instruction Handbook Manual, Page: 393 / 435

Management
11-30 OPERATION GUIDE
Counting the Number of Pages Printed
This counts the number of pages printed. Counts are classified into Total Job Accounting and Each Job
Accounting. A new count can also be started after resetting the count data which was stored for a certain period
of time.
Types of the counts are as follows.
Total Job Accounting/Resetting the Counter
This counts the number of pages for all accounts and resets the counts for those accounts together at the same
time.
Use the procedure below to check and reset the counter.
1
Press the System Menu/Counter key on the main
unit operation panel.
2
In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press
the
OK key.
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to
Adding a User on page 11-6 for
the default login user name and password.
Item Detail
Printed Pages Displays the number of pages copied and printed,
and the total number of pages used. You can also
use [Duplex Pages] and [Combine Pages] to check
the number of pages used.
Scanned Pages Displays the number of pages scanned for copying,
faxing* and other functions, as well as the total
number of pages scanned.
FAX TX Pages* Displays the number of pages faxed.
FAX TX Time*
* FAX functions available only in
CD 1128.
.
Displays the total duration of fax transmissions.
Sys. Menu/Count.:
a b
*********************
5 User Property
6 Common Settings
[ Exit ]
Login User Name
L b
*******************
Login Password:
[ Menu ] [ Login ]