Utax CD 1028 Instruction Handbook Manual Download Page 53

Page: 53 / 435

Preparation before Use

2-20

OPERATION GUIDE

Press the

key. DHCP appears.

Press the

key to select [On] or [Off] and

then press the

key.

Completed.

is displayed and the screen returns to

the IPv4 Setting menu.

Bonjour Settings

Select whether or not to use Bonjour. The default setting is

Off

Use the procedure below to specify the Bonjour setting.

Press the

System Menu/Counter

key on the main

unit operation panel.

When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.

NOTE:

• Refer to

Character Entry Method on Appendix-5

for

details on entering characters.

• If [Netwk Authentic.] is selected as the user

authentication method, press [Menu] (the

Left

Select

key) to select the authentication destination.

In the Sys. Menu/Count. menu, press the

key to select [System], and then press the

key.

IMPORTANT:

To make the settings, you must have

logged in using a user ID with administrator privileges.

If you have logged in using a user ID without
administrator privileges, the screen will display

Administrator only.

and return to the standby screen.

DHCP:

Off

*********************

********************

[ Menu

] [ Login

]

Sys. Menu/Count.:

Report

Counter

*********************

[ Exit

]

Administrator only.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 53 / 435

Search results

Summary of Contents for CD 1028

Reviews: